FERULAC PEEL BOOSTER SYSTEM

1. Cleanse the skin with Sensyses Liposomal Cleanser. Once cleansed, re-spray the solution on the area and massage the area to facilitate drying.
2. Protect the most sensitive areas with Silkses Moisturizing Skin Protector (lips and nostrils).
3. Apply 1-3 layers of Ferulac Peel Classic. Use a gauze pad soaked in the solution starting from the most resistant to the most sensitive areas. Then massage the area until a light white mask forms. Wait for the solution to dry between coats (3-4 minutes).
4. Apply 1-2 additional coats of Ferulac Peel Plus, massaging between coats.
5. Apply 1 coat of Ferulac Nano Additive Mist directly to the area to be treated (8-10 sprays) and massage the area until the solution has penetrated.
6. Seal the treatment by applying a thin layer of Retises Nanopeel 1% Gel and leave it on for approximately 8 hours.
7. After the contact time, the patient should remove the product by washing the treated area with a mild soap (Hidraven soap-free foaming cream).

During the days following the application of the product, a delicate and gradual exfoliation takes place and as a consequence the tissues and skin cells are repaired, clarified, nourished and hydrated.

Repeat the procedure every 14 days in a series of 6 to 12 treatments.

FERULAC PEEL CLASSIC:

• 12% Ferulic acid.
• 5% Floretin.

FERULAC PEEL PLUS:

• 8% Ferulic acid. 
• 5% Floretin. 
• 5% Malic acid. 
• 5% Citric acid. 
• 5% Lactic acid. 
• 0.2% Retinol.